Linear Diffusers

• The high induction linear diffusers of the LAV-24-FIN series have been designed to combine aesthetics with technical performance in air conditioning installations.

• • – Adjustable fins to modify the direction of the air without altering the flow.
  • – Wall or false ceiling mounting at a height between 2.6 and 4 metres.
  • – Designed for installations between 2.6 and 4 metres, with a temperature differential of up to 12 Cº.

Product advantages:

• – 24 mm slot and reduced external frames.
• – High induction index.
• – They allow the formation of continuous lines of the diffuser, with active and inactive zones, without breaking the aesthetic uniformity of the whole.

Accessories:

• – PLAV-24-FIN/L/ Plenum box with lateral circular connection to be mounted behind the plasterboard. Fixing (L) required.
• – PLAV-24/L/ Plenum box with lateral circular connection to be mounted in front of the plasterboard or masonry wall. Fixing (T) required.
• – …-R: Plenum box with an air flow damper in the spigot.
• – …/AIS/ Plenum box with thermal insulation inside.
• – ARF-24: End borders.
• – A90/LAV-24-FIN: Diffuser without end borders, forming a 90º angle.

Fixing:

• – (L): Brackets to hang from the ceiling the diffuser, with or without plenum box. Diffuser riveted to the plenum box.
• – 1 - Screw the front corner to the rear corner. Protect with anti-crack tape and fill with plaster.
• – (T): Set of angles for front fixing of the diffuser, with or without plenum box, by means of hidden screws.
• – 1 - Insert the perforated angle in the upper part of the false ceiling.
• – 2 - Insert the diffuser through the bottom of the false ceiling. Align the front guides with the rear angle and screw. Protect with anti-crack tape and fill with plaster.